HOW TO ADD A

Small Waterfall

Products You Will Need:
Waterfall Cascade
1200 GPH Waterfall Pump
1 in. ID Corrugated Tubing

Tools You Will Need:
Tape measure

Decorative Items You Will Need:
Slate

Before you start planning or digging, take a look at these tips!

measure the height of your waterfall

1

Decide where you’d like to see the waterfall. Consider your view from indoors and outdoors. Measure out the distance and height of where you would like the waterfall to be relative to the edge of your pond.

connect tubing to the waterfall pump

2

When you are happy with the location of the waterfall, connect the tubing to the pump.

TIP! Secure the tubing fit with a hose clamp.

place the waterfall pump in the pond

3

Once the tubing is securely connected, place the pump in the pond.

attach tubing to the waterfall spillway

4

Attach the tubing to the adaptor.

TIP! Secure the fit with a hose clamp.

position the waterfall spillway so the weir hands over the water

5

Carefully, position the spillway so the weir hangs over the water.

use landscaping stone to disguise the diy waterfall

6

To complete the look, stack the rocks and stones around and on the Spillway as a natural disguise. Enjoy!