Mark the desired location of the pond with rope or string and dig the hole. Leave a mound of dirt along the perimeter of the pond.
Cover the entire area with the liner. The liner should extend over the sides of the pond by 10-12 in.
Cover the liner with rock including the 10-12 in. around the perimeter; leave a small area void of rock to run the cords outside the pond. Trim away excess liner.
Add pump with assembled nozzle kit and lights to pond. Position the lighting and run the power cord to the outside of the pond; cover cords with rock.
Fill pond with water. Add Chlorine Remover before adding any fish or plants to water; it removes chlorine, chloramines, and heavy metals from water.
Sit back and enjoy your new creation!